Fruits/Bananas Ripening Chamber & Cold Room

One of the primary ways for the completion of any fruit ripening is the Fruits/Bananas Ripening. For fruit ripening, you can use a Fruit Ripening Chamber. Fruit maturation is also a mechanism to help fruits to taste better. If you mature fruit, you will effectively mature fruit. Banana ripening makes it smoother, sweeter, and yellow in color. Overall, ripening tends to enhance fruit quality and taste. You can have tastier and sweeter bananas if you prefer Banana Ripening.

Frequently Asking Questions

1. What is the method of Fruits/Bananas Ripening?

Temperature management, exposure to standardize and regulate ppm of Ethylene gas, venting of CO2 gas, and reducing the overall ripening time to 4-6 days for optimum output are all features of banana ripening chambers.

2. What considerations should make when constructing banana ripening chambers?

Keep the following in mind when planning the commercial ripening space:

• To avoid ethylene loss, the room must be as airtight as possible.
• The room must well heat in order to maintain temperature stability within a few degrees.
• To efficiently control pulp temperature, space must have adequate refrigeration capacity.
• There must be sufficient air ventilation in the room; and
• The ripening room must equip with enough refrigeration to maintain a consistent pulp temperature.
• The temperature in the ripening room must keep within a few degrees of one another.

3. What is the most crucial characteristic of ripening chambers?

The following are the main features of ripening chambers:

• Puff insulated chambers
• Insulated doors
• Refrigeration system with higher airflow evaporator
• Control panel
• Humidifier
• Ethylene generators & CO2 and Ethylene analyzers to track gas levels in the room
• Crate for stacking

4. What is the ideal room temperature for ripening bananas?

Temperatures are extremely important to bananas. If the fruit is exposed to temperatures below 56 °F (13 °C) for many hours, it can chill. Stop temperatures over 65 °F (18 °C). It’s possible that the fruit is soft and has a low shelf life.

5. What is the ideal humidity standard for banana ripening?

To avoid moisture loss, humidity should be between 90% and 95% for better ripening results. Install a humidifier if the humidity is too low; wetting the room’s floor with water may increase humidity and create sanitation problems.

6. What considerations go into deciding how big the ripening chamber should be?

The number of tiers and pallets to be processed will determine the size of the ripening chamber. On average, 11M 3 per MT of banana fruits in ripening units with a capacity of 10 MT or more, and 12M 3/MT for ripening units with a capacity of less than 10 MT. The volume of one chamber is used in this calculation. The number of chambers will range from four to eight, depending on the length of the ripening period in days.

7. What are the requirements for proper air circulation inside the chambers?

For exporting bananas, the recommended airflow is 2000 Mtr cube per hour per MT of product ripened at 95 percent relative humidity. Local producers, on the other hand, will ripen bananas with airflow rates of 1000-2500 CMH per ton of product.

8. During the ripening period, what materials are used?

Ethylene gas with appropriate detection and dosing equipment to keep ethylene concentrations under acceptable limits, depending on the substance (Range 10 to 200 ppm)

9. Is it possible to keep bananas in a cold storage facility, and if so, for how long?

The temperature of storage: 13 to 14 °C

90-95 percent relative humidity

At 14 °C, the product can be stored for up to 6 weeks.

10. In a ripening bed, what are the steps for ripening bananas?

a) Ripening temperature should be kept between 14 and 20 degrees Celsius;

b) Relative humidity should be kept between 85 and 90%;

c) For fast ripening, higher temperatures should be used within four days;

d) For sluggish ripening, lower temperatures should use within eight to ten days;

e) For new facilities, forced air ripening is advising.

11. How much space provides between stacking bananas during the ripening process?

Banana boxes should place in rows with a 100 mm distance between them to allow for air circulation.

12. How much ethylene gas needs to ripen bananas?

The minimum ethylene gas value for banana ripening is 100 ppm, or 0.1 cu.ft. of ethylene per 1000 cu.ft. of space. As a result, the suggested time for adding ethylene gas to the ripening room is 24-48 hours.

13. How can a banana be stored in a CA (Controlled Atmosphere) chamber?

a) The oxygen concentration ranges from 2 to 5%.
b) Maintain a CO2 concentration of 2-5 percent in the room.

c) Maintain a humidity level of 90-95 percent in the room.

14. What diseases and illnesses associates with banana handling?

a) Anthracnose

b) Blackrot

c) Fruit spot

d) Chilling injury

e) Rhizopusrot

About Us

DANA water heaters & coolers factory LLC (www.danawatercoolers.com) did establish in 2001 is an ISO 9001:2015 certifying company. Our company manufactures our products and we are stainless steel water cooler supplier in UAE. And we present our gratitude to you with immense pride and honor to associate ourselves among the leading producers of water chillers with other cooling and refrigerant solutions, being able to provide our services in almost all Gulf countries and also some African countries including Oman, Bahrain, Kuwait, Saudi Arabia, Jordan and some other GCC nations alongside Arab countries.

We at DANA group have always kept in mind, restrictions, and problems our consumers face and tend to work with utter determination so that we can eliminate these boundaries and bring the best to you at affordable prices. We bring about the product for use in a variety of sectors. Our domestic overhead coolers are an example of our dedication to bringing the best for the complete spectrum of consumers.

Feel free to contact me in case of any inquiry. The listing below is the medium through which you can reach us out!

For Within UAE we have our Expert Mobile Team, which handles all the installations and after-sales support. We provide service across Dubai, Ajman, Sharjah, and Abu Dhabi, Al Ain, RAK, UAQ, and surrounding areas.

For Outside UAE, we are having our agent network, or we also able to send our technicians overseas to handle complete turnkey installations.

Credit – https://danawatercoolers.com/fruits-bananas-ripening-chamber-cold-room/